Aeropak Spray Marking Paint Marker

IMPORTANT : Shake the can vigorously for one minute before use. Holding the can 30cm from prepared surface, begin by applying one light mist coat, spraying in a continuous motion across the surface working left to right. Pause, allowing the mist coat to set for 30 to 60 seconds, then apply additional coats working at 90° to the first coat. If a thicker finish is required, allow at least one hour between extra coats. When painting over existing paint always check compatibility.
 

CLEAN UP
Clean any over spray with mineral turps or general-purpose thinners. For better long term storage, turn can upside down and spray until no paint is coming out.
 
CORRECT DISPOSAL
Spray unneeded product on to newspaper dispose to waste. 
Empty can is recyclable.
 
PRECAUTIONS
Do not use near fire or naked flame. 
Do not puncture or incinerate even if empty.
Keep in a cool place out of direct sunlight. 
Do not store above 50°C. / 122 F 
Never spray at eyes or face.
PROPELLANT: HYDROCARBON
 
SAFETY WARNINGS
Keep out of reach of children 
If swallowed seek medical advice immediately.

Warning - intentional misuse by deliberately inhaling contents 
can be harmful or even fatal.

Aeropak  Marking Paint include the following:

1. Line Marking Paint (Line Marker)

2. Tree Marking Paint (Tree Marker)

3. Survey Marking Paint (Survey Marker)

4. Spot Marking Paint (Spot Marker)

5. Mine Marking Paint (Mine Marker)

6. Animal Marking Paint (Animal Marker)

7. Animal Marking Paste (Tail Paint)